Problem Note 50987: T chart error message is not cleared when Start Over is selected
If you attempt to create a T chart in Control Chart Builder where control limits cannot be calculated, you receive an error message
T chart limits are not estimable with this data.
If you click, the
Start Over button the error message is not clear. The error message is displayed even if you create another chart where the limits are estimable. The only circumvention for this problem is to close the Control Chart Builder and begin again.
Operating System and Release Information
JMP Software | JMP software | Macintosh | 11.0 | 12.0 | | |
Macintosh on x64 | 11.0 | 12.0 | | |
Microsoft Windows 8 Enterprise 32-bit | 11.0 | 12.0 | | |
Microsoft Windows 8 Enterprise x64 | 11.0 | 12.0 | | |
Microsoft Windows 8 Pro 32-bit | 11.0 | 12.0 | | |
Microsoft Windows 8 Pro x64 | 11.0 | 12.0 | | |
Windows 7 Enterprise 32 bit | 11.0 | 12.0 | | |
Windows 7 Enterprise x64 | 11.0 | 12.0 | | |
Windows 7 Home Premium 32 bit | 11.0 | 12.0 | | |
Windows 7 Home Premium x64 | 11.0 | 12.0 | | |
Windows 7 Professional 32 bit | 11.0 | 12.0 | | |
Windows 7 Professional x64 | 11.0 | 12.0 | | |
Windows 7 Ultimate 32 bit | 11.0 | 12.0 | | |
Windows 7 Ultimate x64 | 11.0 | 12.0 | | |
*
For software releases that are not yet generally available, the Fixed
Release is the software release in which the problem is planned to be
fixed.
Type: | Problem Note |
Priority: | high |
Date Modified: | 2014-12-23 17:33:27 |
Date Created: | 2013-09-05 16:37:52 |